dimensions in millimeters (mm) rv 50/100vdc 200/250vdc dim. cap( f) w t h p 1 w t h p 1 0.0010 5.8 3.3 10.5 3.0 7.0 4.0 11.0 3.0 0.0012 5.8 3.3 10.5 3.0 7.0 4.0 11.0 3.0 0.0015 5.8 3.3 10.5 3.0 7.0 4.0 11.0 3.0 0.0018 5.8 3.3 10.5 3.0 7.0 4.0 11.0 3.0 0.0022 5.8 3.3 10.5 3.0 7.0 4.0 11.0 3.0 0.0027 5.8 3.3 10.5 3.0 7.0 4.0 11.0 3.0 0.0033 5.8 3.3 10.5 3.0 7.0 4.0 11.0 3.0 0.0039 6.0 3.5 10.5 3.0 7.0 4.0 11.0 3.0 0.0047 6.0 3.5 10.5 3.0 7.0 4.0 11.0 3.0 0.0056 6.0 3.5 10.5 3.0 7.0 4.0 11.0 3.0 0.0068 6.0 3.5 10.5 3.0 7.0 4.0 11.0 3.0 0.0082 6.5 4.0 10.5 3.0 7.0 4.5 11.0 3.0 0.010 6.5 4.0 10.5 3.0 7.0 4.5 11.0 3.0 0.012 6.5 4.0 10.5 3.0 7.0 4.5 11.0 3.0 0.015 7.5 4.0 10.5 4.0 9.0 5.0 13.0 4.0 0.018 7.5 4.0 10.5 4.0 9.0 5.0 13.0 4.0 0.022 7.8 4.5 10.5 4.0 9.0 5.0 13.0 4.0 0.027 7.8 4.5 12.0 5.0 9.0 5.5 13.0 5.0 0.033 8.0 4.6 12.0 5.0 9.0 5.5 13.0 5.0 0.039 8.0 5.0 12.5 5.0 11.0 6.0 14.0 5.0 0.047 9.3 5.0 12.5 6.0 11.0 6.0 14.0 6.0 0.056 9.7 5.0 12.5 6.0 11.0 7.0 14.0 6.0 0.068 10.0 5.5 12.5 6.0 12.0 7.0 14.0 6.0 0.082 10.5 6.0 12.5 7.0 13.0 8.0 15.0 7.0 0.10 11.5 6.5 13.0 7.0 14.0 8.0 15.0 7.0 0.12 12.0 7.0 13.0 7.0 14.0 8.0 15.0 7.0 0.15 12.0 7.0 15.0 7.0 15.0 8.0 17.0 7.0 0.18 12.0 7.5 16.0 8.0 16.0 9.0 18.0 8.0 0.22 13.5 8.0 16.0 8.0 18.0 10.0 18.0 8.0 0.27 14.0 8.5 16.0 8.0 0.33 15.5 8.5 19.0 10.0 0.39 16.0 9.0 20.0 10.0 0.47 18.0 10.0 21.0 10.0 meritek polypropylene film capacitors ppl series (inductive) f eatures ? low dissipation factor (df) and high insulation resistance ? high stability and reliability ? esr minimized by spot -welding of electrodes and lead wires ? epoxy resin coating enhances mechanical strength and moisture resistance ? heat resistance: 240 o c 10 (5 seconds) s pecifications 1. operating temperature: -40 o c to +85 o c 2. capacitance range: 0.001 f to 0.47 f 3. capacitance tolerance: 5%(j), 10%(k), 20%(m) 4. rated voltage: 50vdc, 100vdc, 200vdc, 250vdc 5. dissipation factor: 0.1% max. at 1khz, 25 o c 6. insulation resistance: 20000m (c .1 f) 2000m ? f (c > .1 f) p art n umbering s ystem ppl 332 j 2a meritek series capacitance code 101 102 103 104 105 106 ( pf ) 100 1,000 10,000 100,000 ( nf ) --- 1 10 100 1000 ( f ) --- 0.001 0.01 0.1 1 10 tolerance code j k m tolerance (%) 5 10 20 rated voltage code 1h 2a 2d 2e 50v 100v 200v 250v tape & reel/tape & ammo available please contact factory for part numbers ppl are constructed with polypropylene film dielectric, tinned copper leads, and an epoxy resin coating. they exhibit comparatively lower dielectric absorption and significantly lower temperature variation in electrostatic capacitance. ppl possess a high insulation resistance and are therefore ideal for use in circuits wherein great importance is placed on q factor, e.g. in rf circuits and computers. 1.5 fications are subject to change without notice. s pecifications are subject to change without notice. rev.6 a
|
